Prior to scale arrival
- Sign and date all documents
- Review the installation procedures
- Verify that the area of installation is level and straight
- Provide Truck Scale Rental with a delivery address and contact phone number
- Verify that a crew and crane are scheduled to meet our truck
When the scale arrives
- Direct our driver to the off-loading site
- Mobilize the crane to the off-loading site
- Remove all sections of truck scale from truck
- Leave blocking on trailer for return use
- Refer to installation manual for installation instructions
- Verify that you have used the single point grounding technique that we require
Prior to scale pickup
(Please verify that that these are all completed prior to our truck arriving)
- Verify the scale is operational and functioning properly
- Disconnect indicator and stow wiring
- Disconnect summing junction boxes and stow wiring
- Verify that all stone has been removed from ramp area
- Refer to installation manual for disassembly of scale
- Remove wing plates from approaching bulkheads
- Remove center section spacers from and place on top of module
- Jack-up scale and insert travel locks at load cells
- Verify that a crane is available when our truck arrives on site
- Pressure wash all weigh bridge components
- Verify that no rocks or other debris are on the scale that can pose a travel hazard
When our truck arrives for pickup
- Ensure that the crane and riggers lift the scale properly onto our trailer
- Verify that the indicator, printer, and cables are loaded in the truck
- Verify that the bulkhead wiring plates are loaded in the truck
- Verify that the center section spacers are loaded on the truck
- Assist driver with tie-down procedure
Please ensure that all items are completed to avoid overtime and/or cleaning charges.
